Boot loader session...

-ASIC3Init

IsEnterBootload: ***1***
+EnterOS(), ulRCSRVal=1,*PFORCECOLDBOOT_SIGNATURE=1A2B3C4D
EnterOS() ***1***
EnterOS() ***2***
EnterOS() - ulRCSRVal=0x1!!
EnterOS() - PBOOT_SIGNATURE address=8C025300
EnterOS() - *PBOOT_SIGNATURE=0
RegisterComponents Success.

Main=8C090FE8

HTC Platform : HB25
Version : Boot Loader V1.05H


Version : IPL  V1.02

Built at: Oct  8 2003 22:07:53
Copyright (c) 2001-2002 High Tech Computer Corporation

+ShowBitmapLogo...
+DispDrvrInitialize...
+Initialize_LCD...
+SetPWMOn...
-SetPWMOn...
Sony LCD Module is being installed....
Initialize_LCD: PCO: 00000001, PCI: 00000001
-Initialize_LCD...
-DispDrvrInitialize...
-ShowBitmapLogo...
main() - Enter Bootload Monitor Main Command function!

USB>map

Uncached_Virtual, Physical  
-----------------------------------------------------------------------------
CS0# 
   0xA2000000,     0x00000000,  32 ;FLASH ROM
   0xAC000000,     0xA0000000,   1 ;SDRAM Bank0
   0xA0000000,     0xA0100000,  31 ;SDRAM Bank0
   0xAC100000,     0xA1100000,  32 ;SDRAM Bank0
   0xBD400000,     0xE0000000,   4 ;Zero Bank
   0xBEA00000,     0x40000000,  20 ;Peripheral Controller
   0xBFE00000,     0x44000000,   1 ;LCD Controller
   0xBFF00000,     0x48000000,   1 ;Memory Controller
CS1# 
CS2# 
CS3# 
   0xA7000000,     0x0C000000,   1 ;HTC Asic3 chip select
CS4# 
   0xBD900000,     0x10000000,   1 ;SD I/O controller
CS5# 
   0xBDE00000,     0x14000000,   1 ;DBG LED REGISTER
   0xBDF00000,     0x15000000,   1 ;DBG LAN REGISTER
   0xBE000000,     0x16000000,   1 ;DBG PPSH REGISTER
   0x00000000,     0x00000000,   0 ;End of Table (MB MUST BE ZERO!)

USB>r
Dump Register : 1
 r0     =8DE036E0 
 r1     =8C037E40 
 r2     =8DE021BC 
 r3     =0 
 r4     =8DE036E0 
 r5     =8C081490 
 r6     =8C037E40 
 r7     =1 
 r8     =8C037E90 
 r9     =0 
r10     =1 
r11     =BF400000 
r12     =8C037DF8 
r13     =8C037E30 
r14     =8C08EC90 
r15     =8C0A3D78 

USB>getflashinfo

Device type=9875,
Media type=5,
Erasable size=8000,
Media size=2000000,
Chip size=2000000,
Interleaving=2
Binary partion number=1, physical size=0x40000, actual size=0x40000, used size=0x40000
BDTL patition section number = 0xE000, size=29360128

USB>r2sd
Load SPL(bootloader) from DiskOnChip to RAM

Start to read SPL.

Start read block 0 (0x81BF4000)

Start read block 1 (0x81BF8000)

Start read block 2 (0x81BFC000)

Start read block 3 (0x81C00000)

Start read block 4 (0x81C04000)

Start read block 5 (0x81C08000)

Start read block 6 (0x81C0C000)

Start read block 7 (0x81C10000)

Start read block 8 (0x81C14000)

Start read block 9 (0x81C18000)

Start read block 10 (0x81C1C000)

Start read block 11 (0x81C20000)

Start read block 12 (0x81C24000)

Start read block 13 (0x81C28000)

Start read block 14 (0x81C2C000)

Start read block 15 (0x81C30000)

Reas SPL success.

Load IPL success.


USB>g 8C0914B8 / You may need to try other near addresses like: g 8C0914BA

+CopyMsystemsToRAM..type=1
-CopyMsystemsToRAM...
Jump to address = 0xA0000000